加熱和冷卻係統

The DuraChill^® recirculating chiller provides cooling power for demanding applications and serves as an economical alternative to tap water cooling systems. Easy to use and maintain, it combines technological innovation with precise temperature control to deliver reliable heat removal for a wide variety of applications.

This Chiller Coolant Mix is designed for use with the PolyScience^® WhisperCool^™ Refrigerated Chiller in Avio and Optima ICP-OES instruments. This coolant mix ships as 5 half-gallon bottles.

Replacement Air Filter for PolyScience Chillers used with Optima ICP-OES and Elan ICP-MS instruments.

This Chiller Coolant Mix is designed for use with the PolyScience^® WhisperCool^™ Refrigerated Chiller in NexION and ELAN ICP-MS instruments. This coolant mix ships as a 1 Liter bottle.

This Replacement Air Filter is designed for use with the PolyScience^® WhisperCool^™ Refrigerated Chiller in ICP-MS and ICP-OES instruments. This 13 inch x 14 inch Air Filter with Frame is fully washable and removes quickly for easy cleaning.

Chiller noise in the lab can be distracting, tiring, irritating and stressful. But many people are unaware of the presence of environmental sound at damaging levels, or at the level on which sound becomes harmful.

This Hot Stage Accessory runs on 100-120 V, 60 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to 爱游戏平台注册登录 Spotlight systems via the slide clip on the instrument's sample stage.

The LN₂ Cold Finger Accessory is a solid aluminum cylinder, 2.94 inches in diameter with 16 insulated ribs, that is used to maintain sub ambient conditions for coolants from liquid nitrogen to ice water.

The Intracooler Insulated Bolt Kit is a spares kit of intracooler connection parts that link 爱游戏平台注册登录 intracoolers to DSC analyzers. This kit includes an insulating disk, split bushing, and a bolt. This kit ships standard with the PYRIS Cooling Accessory Kit.

The Humidity Generator Calibrated Sensor Assembly is an accessory to the Humidity Generator (N5330400/N5330411). With this part number, you can order a sensor as a replacement or spare.

The PYRIS LN₂ Dewar is a stainless steel vessel, 18 inches in diameter, 38 inches high, and about 95 lbs. This dewar has a operating range (under He purge) of -170° to 300°C. This dewar is compatible with the DSC 6000 with Autosampler, DSC 8000, and the Diamond/Jade DSC with Autosampler.

The Liquid Nitrogen Cryo Dewar is a double-walled container through which a coolant, e.g. liquid nitrogen, flows to expand the subambient operating range for the DMA 8000 to temperatures as low as -196°C. This dewar has a 50 L capacity and is optimal for more demanding cryogenic applications. It ships with an Automatic Cryo Kit (N5330259), and installation instructions.

The Automatic Cryo Kit supplies a cryogenic valve that attaches to the AutoCryogenic port on the DMA 8000 analyzer and controls the flow of coolant through a coolant line.

The PYRIS LN₂ Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 6 ft long.

The PYRIS LN₂ Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 3 ft long. This line ships with the PYRIS LN₂ Accessory (N5370259).

Intracooler designed for use with 爱游戏平台注册登录 Differential Scanning Calorimeters.