我們的即插即用積分球模塊是測量各類樣品總反射率、漫反射率和漫透射率的行業標準。對於玻璃行業總日光反射率和透射率的測定，及汽車行業漆膜紫外線透射率的測定而言，建議使用150 mm積分球作為配件。許多國家實驗室將其用於研發和校準測量。
排序方式
1-14 的 14 產品與服務
The Powder Cell Sample Holder is an optional accessory for the 100 mm Integrating Spheres module. This holder allows for routine diffuse reflectance and diffuse transmittance measurements of powdered samples.
An optional accessory for the 100 mm Integrating Spheres module, the Reflectance Port Small Spot Kit includes apertures for 10, 5, and 3 mm beam sizes. This accessory requires the Sample Compartment Iris kit (L6020316).
An optional accessory for the 100 mm Integrating Spheres module, the Transmission Port Small Spot Kit includes apertures for 10, 5, and 3 mm beam sizes. Requires the Reflectance Aperture Kit (L6020314).
The Cuvette Holder is an optional accessory for the 100 mm Integrating Spheres module. This cell holder accommodates 100 mm cuvettes. This holder allows for routine diffuse reflectance and diffuse transmittance measurements of liquid samples.
The Communication Cable for the 50 mm Integrating Sphere connects the sphere's detector module to a LAMBDA 365 spectrometer, enabling communication between the instrument's software and the sphere.
The Small Spot Kits are used inside the 150 mm Integrating Spheres module to reduce the beam size to the transmittance, center mount and diffuse reflectance positions.
The Cuvette Sample Holder accommodates 1 cm cuvettes for transmission or reflectance mode measurements using the 150 mm Integrating Spheres. With this part number, this holder can be ordered as a replacement or spare holder.
The Upward-Looking 270 mm Integrating Spheres is a unique accessory enabling new accuracies to be achieved in the measurement of light-diffusing materials. It is compatible with the LAMBDA 950/1050/1050+ spectrometers.
The 60 mm PbS Integrating Spheres module is used for routine diffuse reflectance and diffuse transmittance measurements on a variety of materials. The module operates in double-beam mode. It is situated in the second sample compartment of LAMBDA spectrometers, leaving the primary sample compartment free for other accessories or samples.
The Clip Style Center-Mounted Sample Holder is best-suited for films and paper samples. The holder sits at the top of the 150 mm Integrating Spheres, allowing the sample to hang inside in the center of the sphere's sample compartment. The sphere is used with the LAMBDA 650/850/850+/90/1050/1050+ spectrometers.
